Are you experiencing Lexmark wireless Printer problems and looking for a way to fix them easily and quickly? The steps for the Lexmark Printer troubleshooting and diagnostics process. Make sure it's linked to the internet via WiFi. Connect with a USB cable and see if it works again. Place your printer where it will receive the greatest WiFi connection with the least amount of interference.
How to Fix the Problem:-
Try connecting to the printer with a cable. This allows you to see whether the WiFi signal is the issue.
Find a new spot for the printer.
Check the printer queue.
Reboot the printer.
Make sure the firmware is up-to-date.
Confirm that your mobile device is on the right network.
Reset the printer.
General Instructions for troubleshooting Lexmark Printer problems
Check that the Lexmark Printer is turned on and the power light is blinking on it
Confirm that all the cables that are connected with your printer are tightened properly
Look whether the connection between your printer and computer is established or not
Try to restart your Lexmark Printer
Remove the power cord and check whether any paper is jammed in the machine and toner is installed properly or not
Check that paper is loaded in the main tray or not
Hard reset your Lexmark Printer then set up it again
Regards,
Willjoe